Lojan Flex Loom Conversion Kit

Description

Lojan Flex Loom Conversion Kit

These conversion kits allow you to modify or expand the Lojan Flex Loom to another version. The kits are available for both loom widths and in three variants:

1. From Rigid Heddle Loom to 4-Shaft Table Loom
• Shelf
• 2 x Upright Spars
• 4 x Shaft Handle
• Bottom Rail
• 8 x Shaft Bar
• 2 x Cross Stick
• 2 x Reed Holder Rails
• Beater Bracket
• Stainless Steel Reed – 10-Dent (40/10)
• Hardware Packet (Screws, Bolts, Nuts, Washers, etc.)
• Sandpaper
• Texsolv Heddles
• 2 x 100 for 12″ (30cm)
• 4 x 100 for 20″ (50cm)
2. From 4-Shaft Table Loom to 8-Shaft Table Loom
• 4 x Shaft Handle
• 8 x Shaft Bar
• Hardware Packet (Screws, Bolts, Nuts, Washers, etc,)
3. From Table Loom to Rigid Heddle Loom
• 2 x Reed Rail
• 2 x Screw 3.5×16 mm
• 4 x Sleeve Nut M6
• 4 x O-ring
• 2 x Rigid Heddle Connector
• 5 x Rigid Heddle Segments – 7.5-Dent (30/10
• Direct Warping Peg
• Table Clamp
• 2 x Reed Support Block
• Elastic Band
• Sandpaper

To convert from a Rigid Heddle Loom to an 8-Shaft Table Loom, you need conversion kit 1 and 2.

Switching between rigid heddle loom and shaft loom is quick and easy.